Allow the bin to dry fully before reinserting it into the vacuum..
You shouldn’t run it under a tap to remove dirt, like you would with.the Dyson V10’s Soft Roller brush bars.
It’s also important to remove the brush bar from the floorhead before you try to clear any obstructions.. To remove the brush bar, unlock the bar’s end cap using a coin.You should then be able to remove the end cap from the bar (the end cap should not be washed).. With the cap removed, you can then slide the brush bar out of the floorhead..Step 2: Remove Obstructions And Wipe The Brush Bar.
Now that the brush bar has been removed from the floorhead, it should be easy to find any potential obstructions.. For example, if there’s thick thread or hair caught around the brush bar, use a pair of scissors to carefully cut and remove it.If there’s any larger debris, then remove this from the bar by hand (make sure you wear gloves and are careful of any potentially sharp material).. You can also use a damp, lint-free cloth to get rid of grime, but avoid using cleaning products or polishes..
This is also a good time to take a look inside the floorhead.
Are there any obstructions or blockages that could be affecting the vacuum’s airflow?Step 2: Choose Between a Bagged or Bagless Vacuum Cleaner.
Many modern vacuum cleaners have a bagless design, but this isn’t always the best choice.Here’s an overview of the differences between bagged and bagless vacuums:.
trap dirt, dust, and other debris in a bag.You’ll need to buy replacement bags, but everything is contained so particles don’t escape during the emptying process.