However, not everyone likes these smells.
Step 2: Remove The Old Battery.Three screws need to be removed before you can take out the V11’s battery.
Here’s where to find them:.The first is on the rear of the vacuum body (almost directly behind the red trigger)..The other two screws are located on the bottom of the battery.
You’ll need to tilt the vacuum onto its side to access them.. It’s worth noting that the bottom screws are meant to be at an angle.Keep this in mind when removing and replacing the screws.. Be very careful to use the right screwdriver when removing the battery.
Using the wrong screwdriver risks stripping the screw heads, which makes the battery very difficult to remove without specialist tools.
We recommend using a Phillips screwdriver, but make sure you check the size.. Once the three screws have been removed, you should be able to slide the battery out of its housing in the vacuum’s handle..While taking off all shoes is ideal, removing stilettos is essential.
The sharp heels could scuff and damage the surface.. 3.Establish a Cleaning Routine.
Regular cleaning helps to prevent the build-up of dust, lint, dead skin cells, and dirt that can cause your floors to look dirty and worn.But how often is regular?.